Product Description
Ford Galaxie 1965-1974 Complete Air Ride Suspension Lowering System Kit
Find a complete air ride system for the 1965-1974 Ford Galaxie that keeps things simpler than a full 4-link rear conversion — this kit drops the car up to 4-5", with a suggested drive height of 3" below stock, using weld-on mounts front and rear rather than a full rear-end geometry swap.
Both the front and rear air spring mounts weld on at the top and bolt on at the bottom, so plan for welding and modification at both ends of the car — this isn't a pure bolt-on kit. A front shock relocation kit, including 2 gas shocks and upper weld-on relocation brackets, keeps your shocks working correctly at the dropped ride height. The air spring setup mixes 2 D2 series springs with 2 of the larger 2600 series springs, the same spring combination used in our Fairlane kit, sized for the weight and geometry of this platform.
Running the system is a 1/3 HP, 100% duty cycle compressor with a 40 amp relay, feeding a 3-gallon, 5-port stainless steel tank rated to 1000 PSI. A non-electric Active Air pneumatic paddle switch with a 150 PSI lighted gauge handles control, backed by a 120 PSI pressure switch that keeps air topped up automatically. A 50 ft roll of 1/4" airhose and a complete fitting pack, tank drain plug included, round out the kit.
Given the welding required at both the front and rear mounts, we strongly recommend a professional installer with the right equipment handle this build.
What's Included – Ford Galaxie 65-74 Complete Air Ride Suspension System
- Front air spring mounts (weld-on upper, bolt-on lower; welding and modification required)
- Rear air spring mounts (weld-on upper, bolt-on lower; welding and modification required)
- Front shock relocation kit with 2 gas shocks and weld-on relocation brackets
- 2x 2500 D2 series air springs, 2x 2600 series air springs
- 1/3 HP 100% duty cycle compressor with 40 amp relay
- 3-gallon, 5-port stainless steel air tank (1000 PSI max rating)
- Active Air pneumatic paddle switch controller with 150 PSI lighted gauge
- 120 PSI pressure switch for constant air maintenance
- 50 ft roll of 1/4" air hose with complete fitting pack and tank drain plug
- Fits 1965-1974 Ford Galaxie
- Designed in the USA
- 1 Year Warranty against manufacturer defects
How This Differs From Our Other Classic Kits
- Simpler rear-end setup than our Fairlane kit — weld-on mounts instead of a full 4-link swap
- Delivers the same 4-5" drop range, with a 3-inches-below-stock drive height as the daily-driving target
- Same proven D2/2600 spring combination sized for this chassis
- Welding required at both front and rear, so budget fabrication time into the install
NOTE: We suggest a professional installer with proper equipment to perform the installation of this kit, given the welding involved at both mounting points.
Please note: Neither the manufacturer nor the seller assumes liability for injury, loss, or damage arising directly or indirectly from installing or using this kit. The user assumes all responsibility in connection with this custom suspension kit and its appropriate use.
Returns: Subject to a 15% restocking fee. Items must be returned within 30 days of purchase and in unused condition — contact us with details prior to returning. If you have any concerns before leaving feedback, please contact us; we're here to help with any customer service issue.
Want a rear 4-link instead of weld-on mounts? Check our Ford Fairlane 55-70 Complete Air Ride Suspension System, or browse the full Ford Galaxy Custom Air Ride Kits category and Custom Air Ride Kits selection. Our Classic Car Builder's Guide to 4-Link Suspension & Air Bags covers more on planning your build.
