Product Description
Ford Galaxie 1963-1964 Complete Air Ride Suspension Lowering System Kit
Buy this complete air ride system for the 1963-1964 Ford Galaxie if you want the full rear geometry upgrade — unlike the 1965-1974 Galaxie kit, which uses weld-on mounts on the factory rear end, this version replaces the rear entirely with a heavy-duty triangulated 4-link for real gains in traction and handling, not just ride height.
Up front, air spring mounts weld on at the top and bolt on at the bottom, so plan on welding and modification there. Out back, rear mounts are upgraded to weld on under and at the rear of the axle to maximize suspension travel, paired with the weld-on triangulated 4-link that handles the actual geometry work. A front shock relocation kit, including 2 gas shocks and upper weld-on relocation brackets, keeps your shocks working correctly once the car is dropped. The air spring setup mixes 2 D2 series springs with 2 of the larger 2600 series springs, sized for this chassis's weight and geometry. The kit lowers the car up to 4-5", with a suggested drive height of 3" below stock for a livable daily ride.
Running the system is a 1/3 HP, 100% duty cycle compressor with a 40 amp relay, feeding a 3-gallon, 5-port stainless steel tank rated to 1000 PSI. A non-electric Active Air pneumatic paddle switch with a 150 PSI lighted gauge handles control, backed by a 120 PSI pressure switch that maintains air automatically. A 50 ft roll of 1/4" air hose and a complete fitting pack, tank drain plug included, finish out the kit.
Given the welding and full 4-link install involved, we strongly recommend a professional installer with the right equipment handle this build.
What's Included – Ford Galaxie 63-64 Complete Air Ride Suspension System
- Front air spring mounts (weld-on upper, bolt-on lower; welding and modification required)
- Rear air spring mounts (weld-on under and rear of axle, maximized for travel)
- Rear weld-on heavy-duty triangulated 4-link
- Front shock relocation kit with 2 gas shocks and weld-on relocation brackets
- 2x 2500 D2 series air springs, 2x 2600 series air springs
- 1/3 HP 100% duty cycle compressor with 40 amp relay
- 3-gallon, 5-port stainless steel air tank (1000 PSI max rating)
- Active Air pneumatic paddle switch controller with 150 PSI lighted gauge
- 120 PSI pressure switch for constant air maintenance
- 50 ft roll of 1/4" air hose with complete fitting pack and tank drain plug
- Fits 1963-1964 Ford Galaxie
- Designed in the USA
- 1 Year Warranty against manufacturer defects
Why This Kit Goes Further Than Our 1965-1974 Galaxie Setup
- Full triangulated 4-link replaces the rear end outright, improving traction and handling, not just drop
- Rear mounts positioned to maximize suspension travel at the new ride height
- Same proven D2/2600 spring combination, matched to this chassis
- Delivers the same 4-5" drop range with a 3-inch-below-stock daily drive height
NOTE: We suggest a professional installer with proper equipment to perform the installation of this kit, given the extent of welding and the rear 4-link install.
Please note: Neither the manufacturer nor the seller assumes liability for injury, loss, or damage arising directly or indirectly from installing or using this kit. The user assumes all responsibility in connection with this custom suspension kit and its appropriate use.
Returns: Subject to a 15% restocking fee. Items must be returned within 30 days of purchase and in unused condition — contact us with details prior to returning. If you have any concerns before leaving feedback, please contact us; we're here to help with any customer service issue.
Have a later Galaxie without the full 4-link setup? See our Ford Galaxie 65-74 Complete Air Ride Suspension System, or browse the full Ford Galaxie Custom Air Ride Kits category. Our Classic Car Builder's Guide to 4-Link Suspension & Air Bags covers more on planning a 4-link build.
